Action mode: pilot type
Diameter range: DN100-600
Working environment temperature: -30—+80℃;-50—+100℃
Coil operating temperature: <+50℃, <+85℃
Control mode: Normally open, Normally closed
International standard voltage: AC (380, 220, 110, 24) V, DC (220, 110, 24, 12) V
Circulating fluid medium: water, gas, oil, flammable, explosive, corrosive, high and low temperature fluids
Circulating fluid temperature: <-100℃, <-40℃, <+60℃, <+120℃, <+200℃, <+350℃
Circulating fluid pressure: 6bar, 16bar, 25bar, 40bar, 64bar
Valve body material: stainless steel (304, 316, 316L), cast steel
Connection method: flange, welding
Leakage: zero leakage
1. If the fluid contains impurities, a filter valve (30-80 mesh/inch) must be installed at the inlet end of the solenoid valve, and there should be no solidification or crystallization.
2. There is no restriction on the installation position of the solenoid valve. (S-horizontal installation, C-vertical installation)
3. The above parameters are selected according to the requirements of the working conditions.
2. Performance characteristics: patented technology, piston structure, rapid switching, long life, exquisite appearance, reliable action
water supply and drainage, sewage treatment, fountains, medical care, food, petrochemical industry, metallurgy, fire protection equipment, building automation, cleaning equipment, shipbuilding industry, power equipment, etc.
Action mode: pilot type
Diameter range: DN100-600
Working environment temperature: -30—+80℃;-50—+100℃
Coil operating temperature: <+50℃, <+85℃
Control mode: Normally open, Normally closed
International standard voltage: AC (380, 220, 110, 24) V, DC (220, 110, 24, 12) V
Circulating fluid medium: water, gas, oil, flammable, explosive, corrosive, high and low temperature fluids
Circulating fluid temperature: <-100℃, <-40℃, <+60℃, <+120℃, <+200℃, <+350℃
Circulating fluid pressure: 6bar, 16bar, 25bar, 40bar, 64bar
Valve body material: stainless steel (304, 316, 316L), cast steel
Connection method: flange, welding
Leakage: zero leakage
1. If the fluid contains impurities, a filter valve (30-80 mesh/inch) must be installed at the inlet end of the solenoid valve, and there should be no solidification or crystallization.
2. There is no restriction on the installation position of the solenoid valve. (S-horizontal installation, C-vertical installation)
3. The above parameters are selected according to the requirements of the working conditions.
2. Performance characteristics: patented technology, piston structure, rapid switching, long life, exquisite appearance, reliable action
water supply and drainage, sewage treatment, fountains, medical care, food, petrochemical industry, metallurgy, fire protection equipment, building automation, cleaning equipment, shipbuilding industry, power equipment, etc.