Action mode: pilot type
Diameter range: DN0.1-600mm
Working environment temperature: -30—+80℃;-50—+100℃
Coil operating temperature: <+50℃, <+85℃
Control mode: normally open, normally closed, self-maintaining
International standard voltage: AC (380, 220, 110, 24) V, DC (220, 110, 24, 12) V
Circulating fluid medium: flammable, explosive, corrosive fluids and gases
Circulating fluid temperature: <-200℃, <-100℃, <-40℃, <+60℃, <+120℃
Circulating fluid pressure: -1bar, 6bar, 16bar, 25bar, 40bar, 63bar, 100bar, 200bar, 300bar
Valve body material: stainless steel (304, 316, 316L), cast steel
Connection method: threaded (internal thread, external thread) flange, welding, clamp, union
Leakage: zero leakage
1. If the fluid contains impurities, a filter valve (30-80 mesh/inch) must be installed at the inlet end of the solenoid valve, and there should be no solidification or crystallization.
2. There is no restriction on the installation position of the solenoid valve. (S-horizontal installation, C-vertical installation)
3. The above parameters are selected according to the requirements of the working conditions.
Specificati on model | Nominal | Inside thread connection | Flange cannection | ||||||
G | L | H | L | H | φD | φk | N-φD | ||
DN1 | 1 | G1/8 | 39 | 95 | |||||
DN2 | 2 | G1/8 G14 | 39 | 95 | |||||
DN3 | 3 | G1/8 G14 | 39 | 95 | |||||
DN4 | 4 | G1/8 G14 | 39 | 95 | |||||
DN5 | 5 | G1/8 G14 | 43 | 115 | |||||
DN6 | 6 | G1/4 | 43 | 115 | |||||
DN7 | 7 | G1/4 | 43 | 115 | |||||
DN8 | 8 | G1/4 | 43 | 115 | |||||
DN10 | 10 | G3/8 | 72 | 149 | |||||
DN15 | 15 | G1/2 | 72 | 149 | 98 | 178 | 94 | 65 | 4-φ14 |
DN20 | 20 | G3/4 | 85 | 186 | 110 | 205 | 103 | 75 | 4-φ14 |
DN25 | 25 | G1 | 97 | 186 | 118 | 217 | 115 | 85 | 4-φ14 |
DN32 | 32 | G11/4 | 117 | 196 | 145 | 238 | 135 | 100 | 4-φ18 |
DN40 | 40 | G11/2 | 128 | 207 | 155 | 253 | 145 | 110 | 4-φ18 |
DN50 | 50 | G2 | 149 | 222 | 173 | 265 | 160 | 125 | 4-φ18 |
DN65 | 65 | 216 | 323 | 180 | 145 | 4-φ18 | |||
DN80 | 80 | 228 | 347 | 195 | 160 | 8-φ18 | |||
DN100 | 100 | 278 | 383 | 215 | 180 | 8-φ18 | |||
DN125 | 125 | 400 | 475 | 245 | 210 | 8-φ18 | |||
DN150 | 150 | 485 | 585 | 280 | 240 | 8-φ18 | |||
DN200 | 200 | 600 | 645 | 335 | 295 | 12-φ23 | |||
DN250 | 250 | 650 | 655 | 406 | 350 | 12-φ25 | |||
DN300 | 300 | 750 | 705 | 460 | 400 | 12-φ25 | |||
DN350 | 350 | 850 | 845 | 520 | 460 | 16-φ25 | |||
DN400 | 400 | 950 | 845 | 580 | 515 | 16-φ30 | |||
DN450 | 450 | 1100 | 1015 | 640 | 565 | 20-φ30 | |||
DN500 | 500 | 1150 | 1015 | 706 | 620 | 20-φ34 | |||
DN600 | 600 | 1400 | 1105 | 840 | 725 | 20-φ36 |
Action mode: pilot type
Diameter range: DN0.1-600mm
Working environment temperature: -30—+80℃;-50—+100℃
Coil operating temperature: <+50℃, <+85℃
Control mode: normally open, normally closed, self-maintaining
International standard voltage: AC (380, 220, 110, 24) V, DC (220, 110, 24, 12) V
Circulating fluid medium: flammable, explosive, corrosive fluids and gases
Circulating fluid temperature: <-200℃, <-100℃, <-40℃, <+60℃, <+120℃
Circulating fluid pressure: -1bar, 6bar, 16bar, 25bar, 40bar, 63bar, 100bar, 200bar, 300bar
Valve body material: stainless steel (304, 316, 316L), cast steel
Connection method: threaded (internal thread, external thread) flange, welding, clamp, union
Leakage: zero leakage
1. If the fluid contains impurities, a filter valve (30-80 mesh/inch) must be installed at the inlet end of the solenoid valve, and there should be no solidification or crystallization.
2. There is no restriction on the installation position of the solenoid valve. (S-horizontal installation, C-vertical installation)
3. The above parameters are selected according to the requirements of the working conditions.
Specificati on model | Nominal | Inside thread connection | Flange cannection | ||||||
G | L | H | L | H | φD | φk | N-φD | ||
DN1 | 1 | G1/8 | 39 | 95 | |||||
DN2 | 2 | G1/8 G14 | 39 | 95 | |||||
DN3 | 3 | G1/8 G14 | 39 | 95 | |||||
DN4 | 4 | G1/8 G14 | 39 | 95 | |||||
DN5 | 5 | G1/8 G14 | 43 | 115 | |||||
DN6 | 6 | G1/4 | 43 | 115 | |||||
DN7 | 7 | G1/4 | 43 | 115 | |||||
DN8 | 8 | G1/4 | 43 | 115 | |||||
DN10 | 10 | G3/8 | 72 | 149 | |||||
DN15 | 15 | G1/2 | 72 | 149 | 98 | 178 | 94 | 65 | 4-φ14 |
DN20 | 20 | G3/4 | 85 | 186 | 110 | 205 | 103 | 75 | 4-φ14 |
DN25 | 25 | G1 | 97 | 186 | 118 | 217 | 115 | 85 | 4-φ14 |
DN32 | 32 | G11/4 | 117 | 196 | 145 | 238 | 135 | 100 | 4-φ18 |
DN40 | 40 | G11/2 | 128 | 207 | 155 | 253 | 145 | 110 | 4-φ18 |
DN50 | 50 | G2 | 149 | 222 | 173 | 265 | 160 | 125 | 4-φ18 |
DN65 | 65 | 216 | 323 | 180 | 145 | 4-φ18 | |||
DN80 | 80 | 228 | 347 | 195 | 160 | 8-φ18 | |||
DN100 | 100 | 278 | 383 | 215 | 180 | 8-φ18 | |||
DN125 | 125 | 400 | 475 | 245 | 210 | 8-φ18 | |||
DN150 | 150 | 485 | 585 | 280 | 240 | 8-φ18 | |||
DN200 | 200 | 600 | 645 | 335 | 295 | 12-φ23 | |||
DN250 | 250 | 650 | 655 | 406 | 350 | 12-φ25 | |||
DN300 | 300 | 750 | 705 | 460 | 400 | 12-φ25 | |||
DN350 | 350 | 850 | 845 | 520 | 460 | 16-φ25 | |||
DN400 | 400 | 950 | 845 | 580 | 515 | 16-φ30 | |||
DN450 | 450 | 1100 | 1015 | 640 | 565 | 20-φ30 | |||
DN500 | 500 | 1150 | 1015 | 706 | 620 | 20-φ34 | |||
DN600 | 600 | 1400 | 1105 | 840 | 725 | 20-φ36 |