Action mode: step-by-step direct action
Diameter range: DN10-300mm
Working environment temperature: -30—+80℃;-50—+100℃
Coil operating temperature: <+50℃, <+85℃
Control mode: Normally open, Normally closed
International standard voltage: AC (380, 220, 110, 24) V, DC (220, 110, 24, 12) V
Circulating fluid medium: water, oil, high and low temperature liquids, etc.
Circulating fluid temperature: <-200℃, <-100℃, <-40℃, <+60℃, <+120℃, <+200℃, <+350℃
Circulating fluid pressure: -1-64bar
Valve body material: stainless steel (304, 316, 316L), cast steel
Connection method: threaded (internal thread, external thread) flange, welding, clamp, union
Leakage: zero leakage
1. If the fluid contains impurities, a filter valve (30-80 mesh/inch) must be installed at the inlet end of the solenoid valve, and there should be no solidification or crystallization.
2. There is no restriction on the installation position of the solenoid valve. (S-horizontal installation, C-vertical installation)
3. The above parameters are selected according to the requirements of the working conditions.
Performance features: patented technology, piston structure, stable performance, good sealing
Application scope: water treatment, building automation, cleaning equipment, filling systems, fire protection equipment, aerospace systems, shipbuilding industry, petrochemical equipment, medical equipment, etc.
Action mode: step-by-step direct action
Diameter range: DN10-300mm
Working environment temperature: -30—+80℃;-50—+100℃
Coil operating temperature: <+50℃, <+85℃
Control mode: Normally open, Normally closed
International standard voltage: AC (380, 220, 110, 24) V, DC (220, 110, 24, 12) V
Circulating fluid medium: water, oil, high and low temperature liquids, etc.
Circulating fluid temperature: <-200℃, <-100℃, <-40℃, <+60℃, <+120℃, <+200℃, <+350℃
Circulating fluid pressure: -1-64bar
Valve body material: stainless steel (304, 316, 316L), cast steel
Connection method: threaded (internal thread, external thread) flange, welding, clamp, union
Leakage: zero leakage
1. If the fluid contains impurities, a filter valve (30-80 mesh/inch) must be installed at the inlet end of the solenoid valve, and there should be no solidification or crystallization.
2. There is no restriction on the installation position of the solenoid valve. (S-horizontal installation, C-vertical installation)
3. The above parameters are selected according to the requirements of the working conditions.
Performance features: patented technology, piston structure, stable performance, good sealing
Application scope: water treatment, building automation, cleaning equipment, filling systems, fire protection equipment, aerospace systems, shipbuilding industry, petrochemical equipment, medical equipment, etc.
