Action mode: pilot type
Diameter range: DN0.1-25mm
Working environment temperature: -30—+80℃;-50—+100℃
Coil operating temperature: <+50℃, <+85℃
Control mode: Normally open, Normally closed
International standard voltage: AC (380, 220, 110, 24) V, DC (220, 110, 24, 12) V
Circulating fluid medium: corrosive fluids (acid, alkali, salt, phenol, formaldehyde, butane, chemical fluids, etc.)
Circulating fluid temperature: <-40℃, <+60℃, <+120℃, <+200℃
1. If the fluid contains impurities, a filter valve (30-80 mesh/inch) must be installed at the inlet end of the solenoid valve, and there should be no solidification or crystallization.
2. There is no restriction on the installation position of the solenoid valve. (S-horizontal installation, C-vertical installation)
3. The above parameters are selected according to the requirements of the working conditions.
Action mode: pilot type
Diameter range: DN0.1-25mm
Working environment temperature: -30—+80℃;-50—+100℃
Coil operating temperature: <+50℃, <+85℃
Control mode: Normally open, Normally closed
International standard voltage: AC (380, 220, 110, 24) V, DC (220, 110, 24, 12) V
Circulating fluid medium: corrosive fluids (acid, alkali, salt, phenol, formaldehyde, butane, chemical fluids, etc.)
Circulating fluid temperature: <-40℃, <+60℃, <+120℃, <+200℃
1. If the fluid contains impurities, a filter valve (30-80 mesh/inch) must be installed at the inlet end of the solenoid valve, and there should be no solidification or crystallization.
2. There is no restriction on the installation position of the solenoid valve. (S-horizontal installation, C-vertical installation)
3. The above parameters are selected according to the requirements of the working conditions.
