Action mode: pilot type
Diameter range: DN0.1-600mm
Working environment temperature: -30—+80℃;-50—+100℃
Coil operating temperature: <+50℃, <+85℃
Control mode: Normally open, Normally closed
International standard voltage: AC (380, 220, 110, 24) V, DC (220, 110, 24, 12) V
Circulating fluid medium: water, gas, oil, ultra-low temperature, ultra-high temperature, corrosive, flammable, explosive and other fluids
Circulating fluid temperature: <-40℃, <+60℃, <+120℃
Circulating fluid pressure: 1bar, 6bar, 16bar, 25bar, 40bar, 64bar
Valve body material: stainless steel (304, 316, 316L), cast steel
Connection method: threaded (internal thread, external thread) flange, welding, clamp, union
Leakage: zero leakage
1. If the fluid contains impurities, a filter valve (30-80 mesh/inch) must be installed at the inlet end of the solenoid valve, and there should be no solidification or crystallization.
2. There is no restriction on the installation position of the solenoid valve. (S-horizontal installation, C-vertical installation)
3. The above parameters are selected according to the requirements of the working conditions.
2. Performance characteristics: patented technology, sensitive switch, good sealing, stable performance, reliable action, never burn the coil when used underwater
Application scope: water supply and drainage, sewage treatment, fountains, medical care, food, petrochemical industry, fire protection equipment, building automation, shipbuilding industry, cleaning equipment.
Specificati on model | Nominal | Inside thread connection | Flange cannection | ||||||
G | L | H | L | H | φD | φk | N-φD | ||
DN1 | 1 | G1/8 | 39 | 95 | |||||
DN2 | 2 | G1/8 G14 | 39 | 95 | |||||
DN3 | 3 | G1/8 G14 | 39 | 95 | |||||
DN4 | 4 | G1/8 G14 | 39 | 95 | |||||
DN5 | 5 | G1/8 G14 | 43 | 115 | |||||
DN6 | 6 | G1/4 | 43 | 115 | |||||
DN7 | 7 | G1/4 | 43 | 115 | |||||
DN8 | 8 | G1/4 | 43 | 115 | |||||
DN10 | 10 | G3/8 | 72 | 149 | |||||
DN15 | 15 | G1/2 | 72 | 149 | 98 | 178 | 94 | 65 | 4-φ14 |
DN20 | 20 | G3/4 | 85 | 186 | 110 | 205 | 103 | 75 | 4-φ14 |
DN25 | 25 | G1 | 97 | 186 | 118 | 217 | 115 | 85 | 4-φ14 |
DN32 | 32 | G11/4 | 117 | 196 | 145 | 238 | 135 | 100 | 4-φ18 |
DN40 | 40 | G11/2 | 128 | 207 | 155 | 253 | 145 | 110 | 4-φ18 |
DN50 | 50 | G2 | 149 | 222 | 173 | 265 | 160 | 125 | 4-φ18 |
DN65 | 65 | 216 | 323 | 180 | 145 | 4-φ18 | |||
DN80 | 80 | 228 | 347 | 195 | 160 | 8-φ18 | |||
DN100 | 100 | 278 | 383 | 215 | 180 | 8-φ18 | |||
DN125 | 125 | 400 | 475 | 245 | 210 | 8-φ18 | |||
DN150 | 150 | 485 | 585 | 280 | 240 | 8-φ18 | |||
DN200 | 200 | 600 | 645 | 335 | 295 | 12-φ23 | |||
DN250 | 250 | 650 | 655 | 406 | 350 | 12-φ25 | |||
DN300 | 300 | 750 | 705 | 460 | 400 | 12-φ25 | |||
DN350 | 350 | 850 | 845 | 520 | 460 | 16-φ25 | |||
DN400 | 400 | 950 | 845 | 580 | 515 | 16-φ30 | |||
DN450 | 450 | 1100 | 1015 | 640 | 565 | 20-φ30 | |||
DN500 | 500 | 1150 | 1015 | 706 | 620 | 20-φ34 | |||
DN600 | 600 | 1400 | 1105 | 840 | 725 | 20-φ36 |
Action mode: pilot type
Diameter range: DN0.1-600mm
Working environment temperature: -30—+80℃;-50—+100℃
Coil operating temperature: <+50℃, <+85℃
Control mode: Normally open, Normally closed
International standard voltage: AC (380, 220, 110, 24) V, DC (220, 110, 24, 12) V
Circulating fluid medium: water, gas, oil, ultra-low temperature, ultra-high temperature, corrosive, flammable, explosive and other fluids
Circulating fluid temperature: <-40℃, <+60℃, <+120℃
Circulating fluid pressure: 1bar, 6bar, 16bar, 25bar, 40bar, 64bar
Valve body material: stainless steel (304, 316, 316L), cast steel
Connection method: threaded (internal thread, external thread) flange, welding, clamp, union
Leakage: zero leakage
1. If the fluid contains impurities, a filter valve (30-80 mesh/inch) must be installed at the inlet end of the solenoid valve, and there should be no solidification or crystallization.
2. There is no restriction on the installation position of the solenoid valve. (S-horizontal installation, C-vertical installation)
3. The above parameters are selected according to the requirements of the working conditions.
2. Performance characteristics: patented technology, sensitive switch, good sealing, stable performance, reliable action, never burn the coil when used underwater
Application scope: water supply and drainage, sewage treatment, fountains, medical care, food, petrochemical industry, fire protection equipment, building automation, shipbuilding industry, cleaning equipment.
Specificati on model | Nominal | Inside thread connection | Flange cannection | ||||||
G | L | H | L | H | φD | φk | N-φD | ||
DN1 | 1 | G1/8 | 39 | 95 | |||||
DN2 | 2 | G1/8 G14 | 39 | 95 | |||||
DN3 | 3 | G1/8 G14 | 39 | 95 | |||||
DN4 | 4 | G1/8 G14 | 39 | 95 | |||||
DN5 | 5 | G1/8 G14 | 43 | 115 | |||||
DN6 | 6 | G1/4 | 43 | 115 | |||||
DN7 | 7 | G1/4 | 43 | 115 | |||||
DN8 | 8 | G1/4 | 43 | 115 | |||||
DN10 | 10 | G3/8 | 72 | 149 | |||||
DN15 | 15 | G1/2 | 72 | 149 | 98 | 178 | 94 | 65 | 4-φ14 |
DN20 | 20 | G3/4 | 85 | 186 | 110 | 205 | 103 | 75 | 4-φ14 |
DN25 | 25 | G1 | 97 | 186 | 118 | 217 | 115 | 85 | 4-φ14 |
DN32 | 32 | G11/4 | 117 | 196 | 145 | 238 | 135 | 100 | 4-φ18 |
DN40 | 40 | G11/2 | 128 | 207 | 155 | 253 | 145 | 110 | 4-φ18 |
DN50 | 50 | G2 | 149 | 222 | 173 | 265 | 160 | 125 | 4-φ18 |
DN65 | 65 | 216 | 323 | 180 | 145 | 4-φ18 | |||
DN80 | 80 | 228 | 347 | 195 | 160 | 8-φ18 | |||
DN100 | 100 | 278 | 383 | 215 | 180 | 8-φ18 | |||
DN125 | 125 | 400 | 475 | 245 | 210 | 8-φ18 | |||
DN150 | 150 | 485 | 585 | 280 | 240 | 8-φ18 | |||
DN200 | 200 | 600 | 645 | 335 | 295 | 12-φ23 | |||
DN250 | 250 | 650 | 655 | 406 | 350 | 12-φ25 | |||
DN300 | 300 | 750 | 705 | 460 | 400 | 12-φ25 | |||
DN350 | 350 | 850 | 845 | 520 | 460 | 16-φ25 | |||
DN400 | 400 | 950 | 845 | 580 | 515 | 16-φ30 | |||
DN450 | 450 | 1100 | 1015 | 640 | 565 | 20-φ30 | |||
DN500 | 500 | 1150 | 1015 | 706 | 620 | 20-φ34 | |||
DN600 | 600 | 1400 | 1105 | 840 | 725 | 20-φ36 |