Lining material: PTFE, PFAFEP, PVDF, PO, PP, PE
Connection: flange connection
Nominal diameter (DN) | Outer diameter of steel pipe | PN1.6MPa | |||||
wall thickness | Tee, 4-wayH | ReducerL | |||||
Steel pipe fittings t (min) | Lining layer T (min.) | ||||||
Pushpipe | rotomolded pipe | Winding Tube | |||||
25×25 | 33.7×33.7 | 3.38×3.38 | 2.0 | 2.0 | 1.2 | 90 | - |
32×32 | 42.4x42.4 | 3.56×3.56 | 2.0 | 2.0 | 1.25 | 95 | - |
32×25 | 42.4×33.7 | 3.56×3.38 | 95 | ||||
40×40 | 48.3×48.3 | 3.68×3.68 | 2.5 | 2.0 | 1.30 | 100 | - |
40*32 | 48.3×42.4 | 3.68×3.56 | 100 | ||||
40×25 | 48.3×33.7 | 3.68×3.38 | 100 | ||||
50×50 | 60.3×60.3 | 3.91×3.91 | 2.5 | 2.5 | 1.35 | 115 | - |
50×40 | 60.3×48.3 | 3.91×3.68 | 115 | ||||
50×32 | 60.3×42.4 | 3.91×3.56 | |||||
50×25 | 60.3×33.7 | 3.91×3.38 | |||||
65×65 | 76.1×76.1 | 5.16×5.16 | 3.0 | 2.5 | 1.4 | 125 | - |
65×50 | 76.1×60.3 | 5.16×3.91 | 125 | ||||
65×40 | 76.1×48.3 | 5.16×3.68 | |||||
65×32 | 76.1×42.4 | 5.16×3.56 | |||||
80×80 | 88.9×88.9 | 5.49×5.49 | 3.0 | 3.0 | 1.45 | 140 | - |
80×65 | RR 9×76. | 5.49×5.16 | 140 | ||||
80×50 | 88.9×60.3 | 5.49×3.91 | |||||
80×40 | 88.9×60.3 | 5.49×3.68 | |||||
100×100 | 889x48.3 | 6.02×6.02 | 3.5 | 3.0 | 1.5 | 165 | - |
100×80 | 114.3×114.3 | 6.02×5.49 | 165 | ||||
100×65 | 114.3×88.9 | 6.02×5.16 | |||||
100×50 | 114.3×76.1 | 6.02×3.91 | |||||
125×125 | 114.3×60.3 | 6.55×6.55 | 3.5 | 3.5 | 1.6 | 190 | 190 |
125×100 | 139.7×139.7 | 6.55×6.02 | |||||
125×80 | 139.7×114.3 | 6.55×5.49 | |||||
125×65 | 139.7×88.9 | 6.55×5.16 | |||||
150×150 | 139.7×76.1 | 7.11×7.11 | 4.0 | 3.5 | 1.8 | 205 | - |
150×125 | 168.3×139.7 | 7.11×6.55 | 205 | ||||
150×100 | 168.3×114.3 | 7.11×6.02 | |||||
150×80 | 168.3×88.9 | 7.11×5.49 | |||||
200×200 | 219.1×219.1 | 6.35×6.35 | 4.5 | 4.5 | 2.0 | 230 | - |
200×150 | 219.1×168.3 | 6.35×7.11 | 230 | ||||
200×125 | 219.1×139.7 | 6.35×6.55 | |||||
200×100 | 219.1×114.3 | 6.35×6.02 | |||||
250×250 | 273.0×373.0 | 6.35×6.35 | 5.0 | 5.0 | 2.2 | 280 | - |
250×200 | 273.0×219.1 | 6.35×6.35 | 280 | ||||
250×150 | 273.0×168.3 | 6.35×7.11 | |||||
250×125 | 273.0×139.7 | 6.35×6.55 | |||||
300×300 | 323.9×323.9 | 8.38×8.38 | 6.0 | 5.0 | 2.4 | 305 | - |
300×250 | 323.9×273.0 | 8.38×6.35 | 305 | ||||
300×200 | 323.9×219.1 | 8.38×6.35 | |||||
300×125 | 323.9×168.3 | 8.38×6.55 | |||||
350×350 | 355.6×355.6 | 9.53×9.53 | 6.0 | 5.0 | 2.6 | 380 | - |
350x300 | 355.6×323.9 | 9.53×8.38 | 380 | ||||
350×250 | 355.6×273.0 | 9.53×6.35 | |||||
350×200 | 355.6×219.1 | 9.53×6.35 | |||||
400×400 | 406.4×406.4 | 9.53×9.53 | 6.0 | 5.0 | 2.8 | 380 | 380 |
400×350 | 406.4×355.6 | 9.53×9.53 | |||||
400×300 | 406.4×323.9 | 9.53×8.38 | |||||
400×250 | 406.4×273.0 | 9.53×6.35 | |||||
400×200 | 406.4×219.1 | 9.53×6.35 | |||||
Note: 1) The steel pipe size in the above table is imperial pipe, and other standard steel pipe can also be used according to customer's need.
2)Flange connection size can be adopted according to customers' needs, such as national standard, German standard, American standard, Japanese standard, etc.
Lining material: PTFE, PFAFEP, PVDF, PO, PP, PE
Connection: flange connection
Nominal diameter (DN) | Outer diameter of steel pipe | PN1.6MPa | |||||
wall thickness | Tee, 4-wayH | ReducerL | |||||
Steel pipe fittings t (min) | Lining layer T (min.) | ||||||
Pushpipe | rotomolded pipe | Winding Tube | |||||
25×25 | 33.7×33.7 | 3.38×3.38 | 2.0 | 2.0 | 1.2 | 90 | - |
32×32 | 42.4x42.4 | 3.56×3.56 | 2.0 | 2.0 | 1.25 | 95 | - |
32×25 | 42.4×33.7 | 3.56×3.38 | 95 | ||||
40×40 | 48.3×48.3 | 3.68×3.68 | 2.5 | 2.0 | 1.30 | 100 | - |
40*32 | 48.3×42.4 | 3.68×3.56 | 100 | ||||
40×25 | 48.3×33.7 | 3.68×3.38 | 100 | ||||
50×50 | 60.3×60.3 | 3.91×3.91 | 2.5 | 2.5 | 1.35 | 115 | - |
50×40 | 60.3×48.3 | 3.91×3.68 | 115 | ||||
50×32 | 60.3×42.4 | 3.91×3.56 | |||||
50×25 | 60.3×33.7 | 3.91×3.38 | |||||
65×65 | 76.1×76.1 | 5.16×5.16 | 3.0 | 2.5 | 1.4 | 125 | - |
65×50 | 76.1×60.3 | 5.16×3.91 | 125 | ||||
65×40 | 76.1×48.3 | 5.16×3.68 | |||||
65×32 | 76.1×42.4 | 5.16×3.56 | |||||
80×80 | 88.9×88.9 | 5.49×5.49 | 3.0 | 3.0 | 1.45 | 140 | - |
80×65 | RR 9×76. | 5.49×5.16 | 140 | ||||
80×50 | 88.9×60.3 | 5.49×3.91 | |||||
80×40 | 88.9×60.3 | 5.49×3.68 | |||||
100×100 | 889x48.3 | 6.02×6.02 | 3.5 | 3.0 | 1.5 | 165 | - |
100×80 | 114.3×114.3 | 6.02×5.49 | 165 | ||||
100×65 | 114.3×88.9 | 6.02×5.16 | |||||
100×50 | 114.3×76.1 | 6.02×3.91 | |||||
125×125 | 114.3×60.3 | 6.55×6.55 | 3.5 | 3.5 | 1.6 | 190 | 190 |
125×100 | 139.7×139.7 | 6.55×6.02 | |||||
125×80 | 139.7×114.3 | 6.55×5.49 | |||||
125×65 | 139.7×88.9 | 6.55×5.16 | |||||
150×150 | 139.7×76.1 | 7.11×7.11 | 4.0 | 3.5 | 1.8 | 205 | - |
150×125 | 168.3×139.7 | 7.11×6.55 | 205 | ||||
150×100 | 168.3×114.3 | 7.11×6.02 | |||||
150×80 | 168.3×88.9 | 7.11×5.49 | |||||
200×200 | 219.1×219.1 | 6.35×6.35 | 4.5 | 4.5 | 2.0 | 230 | - |
200×150 | 219.1×168.3 | 6.35×7.11 | 230 | ||||
200×125 | 219.1×139.7 | 6.35×6.55 | |||||
200×100 | 219.1×114.3 | 6.35×6.02 | |||||
250×250 | 273.0×373.0 | 6.35×6.35 | 5.0 | 5.0 | 2.2 | 280 | - |
250×200 | 273.0×219.1 | 6.35×6.35 | 280 | ||||
250×150 | 273.0×168.3 | 6.35×7.11 | |||||
250×125 | 273.0×139.7 | 6.35×6.55 | |||||
300×300 | 323.9×323.9 | 8.38×8.38 | 6.0 | 5.0 | 2.4 | 305 | - |
300×250 | 323.9×273.0 | 8.38×6.35 | 305 | ||||
300×200 | 323.9×219.1 | 8.38×6.35 | |||||
300×125 | 323.9×168.3 | 8.38×6.55 | |||||
350×350 | 355.6×355.6 | 9.53×9.53 | 6.0 | 5.0 | 2.6 | 380 | - |
350x300 | 355.6×323.9 | 9.53×8.38 | 380 | ||||
350×250 | 355.6×273.0 | 9.53×6.35 | |||||
350×200 | 355.6×219.1 | 9.53×6.35 | |||||
400×400 | 406.4×406.4 | 9.53×9.53 | 6.0 | 5.0 | 2.8 | 380 | 380 |
400×350 | 406.4×355.6 | 9.53×9.53 | |||||
400×300 | 406.4×323.9 | 9.53×8.38 | |||||
400×250 | 406.4×273.0 | 9.53×6.35 | |||||
400×200 | 406.4×219.1 | 9.53×6.35 | |||||
Note: 1) The steel pipe size in the above table is imperial pipe, and other standard steel pipe can also be used according to customer's need.
2)Flange connection size can be adopted according to customers' needs, such as national standard, German standard, American standard, Japanese standard, etc.
