model number | KXT-(1)model | KXT-(II)model | KXT-(III)model |
work pressureMPa(Kg.f.cm²) | 2.0(20 | 1.2(12) | 0.8(8 |
burst pressureMPa(Kg.f.cm²) | 6.0(60) | 3.5(35) | 2.4(24 |
vacuum(mmHg) | 86.7(650) | 53.3(400) | 40(300) |
trial temperature℃ | -50~+180°℃ | ||
Applicable medium | Organic and inorganic solvents such as strong acids, strong bases, etc. | ||
serial number | place | makings |
1 | main part | Polar Rubber |
2 | lining (of a container etc) (engineering) | nylon cord fabric |
3 | Rubber Skeleton | hard wire |
4 | flangeless | steel (chemistry) |
5 | lining | polytetrafluoroethylene |
Nominal diameter | lengths L (mm) | PN1.0(MPa) | axial displacement-X(mm) | transverse displacement (mm) | angle of drift (navigation) (α1+a2) | weights (kg) | ||||
DN (mm) | NPS (Inch) | Number of bolts n | Bolt Hole Diameter Medium I(mm) | Bolt hole center Diameter of center circle K(mm) | elongate +△X | compressed -△X | ||||
50 | 2 | 160 | 4 | 18 | 125 | 30 | 50 | 45 | 40° | 5.00 |
65 | 21/2 | 165 | 4 | 18 | 145 | 30 | 50 | 45 | 40° | 6.70 |
80 | 3 | 170 | 8 | 18 | 160 | 30 | 50 | 45 | 40° | 7.90 |
100 | 4 | 200 | 8 | 18 | 180 | 35 | 50 | 40 | 35° | 9.10 |
125 | 5 | 210 | 8 | 18 | 210 | 35 | 50 | 40 | 35° | 11.30 |
150 | 6 | 210 | 8 | 22 | 240 | 35 | 50 | 40 | 35° | 14.50 |
200 | 8 | 335 | 8 | 22 | 295 | 35 | 50 | 35 | 30° | 19.70 |
250 | 10 | 335 | 12 | 22 | 350 | 35 | 60 | 35 | 30° | 26.90 |
300 | 12 | 335 | 12 | 22 | 400 | 35 | 60 | 35 | 30° | 31.10 |
Note: Other standard or non-standard flanges need to make a separate agreement, specify the standard or provide drawings and relevant data, the company can system production.DN350-600 for the I Ⅲ type products, working pressure 0.8MPa
model number | KXT-(1)model | KXT-(II)model | KXT-(III)model |
work pressureMPa(Kg.f.cm²) | 2.0(20 | 1.2(12) | 0.8(8 |
burst pressureMPa(Kg.f.cm²) | 6.0(60) | 3.5(35) | 2.4(24 |
vacuum(mmHg) | 86.7(650) | 53.3(400) | 40(300) |
trial temperature℃ | -50~+180°℃ | ||
Applicable medium | Organic and inorganic solvents such as strong acids, strong bases, etc. | ||
serial number | place | makings |
1 | main part | Polar Rubber |
2 | lining (of a container etc) (engineering) | nylon cord fabric |
3 | Rubber Skeleton | hard wire |
4 | flangeless | steel (chemistry) |
5 | lining | polytetrafluoroethylene |
Nominal diameter | lengths L (mm) | PN1.0(MPa) | axial displacement-X(mm) | transverse displacement (mm) | angle of drift (navigation) (α1+a2) | weights (kg) | ||||
DN (mm) | NPS (Inch) | Number of bolts n | Bolt Hole Diameter Medium I(mm) | Bolt hole center Diameter of center circle K(mm) | elongate +△X | compressed -△X | ||||
50 | 2 | 160 | 4 | 18 | 125 | 30 | 50 | 45 | 40° | 5.00 |
65 | 21/2 | 165 | 4 | 18 | 145 | 30 | 50 | 45 | 40° | 6.70 |
80 | 3 | 170 | 8 | 18 | 160 | 30 | 50 | 45 | 40° | 7.90 |
100 | 4 | 200 | 8 | 18 | 180 | 35 | 50 | 40 | 35° | 9.10 |
125 | 5 | 210 | 8 | 18 | 210 | 35 | 50 | 40 | 35° | 11.30 |
150 | 6 | 210 | 8 | 22 | 240 | 35 | 50 | 40 | 35° | 14.50 |
200 | 8 | 335 | 8 | 22 | 295 | 35 | 50 | 35 | 30° | 19.70 |
250 | 10 | 335 | 12 | 22 | 350 | 35 | 60 | 35 | 30° | 26.90 |
300 | 12 | 335 | 12 | 22 | 400 | 35 | 60 | 35 | 30° | 31.10 |
Note: Other standard or non-standard flanges need to make a separate agreement, specify the standard or provide drawings and relevant data, the company can system production.DN350-600 for the I Ⅲ type products, working pressure 0.8MPa
