Lining material: PTFE, PFAFEP, PVDF, PO, PP, PE Connection: flange connection
Nominal diameter (DN) | Outer diameter of steel pipe | PN1.6MPa | |||||
wall thickness | lengths L(mm) | unit length (mm) | |||||
Steel pipe fittings (minimum) | Lining layer T (min.) | ||||||
push-pipe | rotomolded pipe | winding tube | |||||
25 | 33.7 | 3.38 | 2.0 | 2.0 | 1.2 | 100-2000 | 4.2 |
32 | 42.4 | 3.56 | 2.0 | 2.0 | 1.2 | 6.5 | |
40 | 48.3 | 3.68 | 2.5 | 2.0 | 1.30 | 7.5 | |
50 | 60.3 | 3.91 | 2.5 | 2.5 | 1.35 | 150-2000 | 10.4 |
65 | 76.1 | 5.16 | 3.0 | 2.5 | 1.4 | 14.7 | |
80 | 88.9 | 5.49 | 3.0 | 3.0 | 1.45 | 16.7 | |
100 | 114.3 | 6.02 | 3.5 | 3.0 | 1.5 | 21.1 | |
125 | 139.7 | 6.55 | 3.5 | 3.5 | 1.6 | 27.4 | |
150 | 168.3 | 7.11 | 4.0 | 3.5 | 1.8 | 35.4 | |
200 | 219.1 | 6.35 | 4.5 | 4.5 | 2.0 | 200-2000 | 55 |
250 | 273.0 | 6.35 | 5.0 | 5.0 | 2.2 | 88.2 | |
300 | 323.9 | 8.38 | 6.0 | 5.0 | 2.4 | 104.5 | |
350 | 355.6 | 9.53 | 6.0 | 5.0 | 2.6 | 142.5 | |
400 | 406.4 | 9.53 | 6.0 | 5.0 | 2.8 | 186.7 | |
Lining material: PTFE, PFAFEP, PVDF, PO, PP, PE Connection: flange connection
Nominal diameter (DN) | Outer diameter of steel pipe | PN1.6MPa | |||||
wall thickness | lengths L(mm) | unit length (mm) | |||||
Steel pipe fittings (minimum) | Lining layer T (min.) | ||||||
push-pipe | rotomolded pipe | winding tube | |||||
25 | 33.7 | 3.38 | 2.0 | 2.0 | 1.2 | 100-2000 | 4.2 |
32 | 42.4 | 3.56 | 2.0 | 2.0 | 1.2 | 6.5 | |
40 | 48.3 | 3.68 | 2.5 | 2.0 | 1.30 | 7.5 | |
50 | 60.3 | 3.91 | 2.5 | 2.5 | 1.35 | 150-2000 | 10.4 |
65 | 76.1 | 5.16 | 3.0 | 2.5 | 1.4 | 14.7 | |
80 | 88.9 | 5.49 | 3.0 | 3.0 | 1.45 | 16.7 | |
100 | 114.3 | 6.02 | 3.5 | 3.0 | 1.5 | 21.1 | |
125 | 139.7 | 6.55 | 3.5 | 3.5 | 1.6 | 27.4 | |
150 | 168.3 | 7.11 | 4.0 | 3.5 | 1.8 | 35.4 | |
200 | 219.1 | 6.35 | 4.5 | 4.5 | 2.0 | 200-2000 | 55 |
250 | 273.0 | 6.35 | 5.0 | 5.0 | 2.2 | 88.2 | |
300 | 323.9 | 8.38 | 6.0 | 5.0 | 2.4 | 104.5 | |
350 | 355.6 | 9.53 | 6.0 | 5.0 | 2.6 | 142.5 | |
400 | 406.4 | 9.53 | 6.0 | 5.0 | 2.8 | 186.7 | |
