The gas filter is an auxiliary equipment of the liquid flowmeter. When the volume flowmeter is used to measure the flow of the liquid, if the liquid is mixed with gas, the liquid and the gas mixed in it are measured at the same time, although the flowmeter itself has high accuracy, it also loses its significance. Therefore, it is necessary to mix the gas of the measured liquid before it flows into the flowmeter. The gas elimination filter can play the role of separating and excluding the gas contained in the liquid, and can overcatch the impurity particles contained in the tested liquid, so as to ensure the normal operation of the flowmeter and the accuracy of the flow rate measurement
bore | D | H | H1 | |
DN50 | 340 | 159 | 420 | 190 |
DN65 | 340 | 159 | 420 | 220 |
DN80 | 340 | 159 | 500 | 220 |
DN100 | 400 | 219 | 580 | 280 |
DN125 | 500 | 273 | 700 | 390 |
DN150 | 500 | 273 | 700 | 390 |
DN200 | 560 | 325 | 900 | 500 |
DN250 | 660 | 426 | 1000 | 600 |
DN300 | 750 | 480 | 1700 | 1160 |
DN350 | 800 | 530 | 1900 | 1310 |
The Social ONI | 25-600 (see Parameter Table) | attended mode | flange |
Shell material | Carbon steel, stainless steel | Flange pressure | 0.25-2.5MPa,150LB |
Filter material | stainless steel | Flange sealing surface | FF、RF、MFM、T、G、RJ |
Over the precision | For 10 items- -300 items | Gasket material | PTFE, nitrile rubber |
The gas filter is an auxiliary equipment of the liquid flowmeter. When the volume flowmeter is used to measure the flow of the liquid, if the liquid is mixed with gas, the liquid and the gas mixed in it are measured at the same time, although the flowmeter itself has high accuracy, it also loses its significance. Therefore, it is necessary to mix the gas of the measured liquid before it flows into the flowmeter. The gas elimination filter can play the role of separating and excluding the gas contained in the liquid, and can overcatch the impurity particles contained in the tested liquid, so as to ensure the normal operation of the flowmeter and the accuracy of the flow rate measurement
bore | D | H | H1 | |
DN50 | 340 | 159 | 420 | 190 |
DN65 | 340 | 159 | 420 | 220 |
DN80 | 340 | 159 | 500 | 220 |
DN100 | 400 | 219 | 580 | 280 |
DN125 | 500 | 273 | 700 | 390 |
DN150 | 500 | 273 | 700 | 390 |
DN200 | 560 | 325 | 900 | 500 |
DN250 | 660 | 426 | 1000 | 600 |
DN300 | 750 | 480 | 1700 | 1160 |
DN350 | 800 | 530 | 1900 | 1310 |
The Social ONI | 25-600 (see Parameter Table) | attended mode | flange |
Shell material | Carbon steel, stainless steel | Flange pressure | 0.25-2.5MPa,150LB |
Filter material | stainless steel | Flange sealing surface | FF、RF、MFM、T、G、RJ |
Over the precision | For 10 items- -300 items | Gasket material | PTFE, nitrile rubber |