Electric flange ball valve is composed of electric actuator and ball valve. The actuator and the valve adopt direct connection mode, with delicate and beautiful appearance. Electric flange ball valve can be used with a variety of valve seat, room temperature type with PTFE seal, high temperature type can be used with para-polybenzene or metal hard seal, with low friction coefficient, small operating torque, leakage zui high up to zero leakage, etc., a variety of seat materials can be selected to adapt to a wider range. Electric flange ball valve according to the structure can be divided into two kinds of electric hard seal ball valve and electric soft seal ball valve. Electric flange ball valve with YTR series actuator can directly receive computer or industrial instrumentation output 4 ~ 20mADC or 1 ~ 5VDC control signals, according to the valve position feedback signal and the set value comparison deviation of the actuator drive motor for intelligent step adjustment (PID regulation), in order to achieve with the actuator supporting the accurate positioning of the opening of valves or other devices, and at the same time, the output of the position feedback signal of 4 ~ 20mADC, and the output of the position feedback signal. 20mADC position feedback signal.
The electric flange ball valve is particularly suitable for the medium is viscous, containing particles, fiber nature of the occasion, the electric flange ball valve is widely used in petroleum, chemical industry, metallurgy, light industry, papermaking, power station, refrigeration and other fields of work.
1、Valve body
Valve body form | Straight-through casting ball valve |
Nominal diameter | DN15~300mm |
Nominal pressure | PN1.6、2.5、4.0 MPa;ANSI 150、300LB ;JIS 10、20、30K |
Flange Standard | GB/T9113、 JB/T79、HG20594and other standards |
Connection form | Flange (FF RF RTJ), Welded (SW BW), Threaded (Taper Thread, Pipe Thread) |
Bonnet type | monolithic |
Gland type | Bolt down type |
sealing packing | V-shaped PTFE packing, impregnated PTFE packing, asbestos braided packing, flexible graphite |
Valve Material | Cast steel (WCB), stainless steel (CF8, CF8M, CF3, CF3M), chrome-molybdenum steel, WCB+F46 |
2、Valve inner parts
Spool type | O-ball spool + electronic polishing |
Flow Rate Characteristics | Approximate fast-opening characteristic |
Spool material | stainless steels(CF8、CF8M、CF3、CF3M)+nitriding |
3. Actuator
Actuator Model | YTR、3810R、DZW、HQ、PSQ |
Main technical parameters | Power supply voltage: 220V/50Hz, 380V/50Hz, input signal: 4-20mA or 1-5V-DC, output signal: 4-20mA-DC |
Protection level: IP65 (or IP67), explosion-proof symbol: ExdⅡBT4 (CT5), hand-operated functions: handle, handwheel | |
Ambient temperature: -25~+70℃, ambient humidity: ≤95%. |
4. Electric flange ball valve Main performance specification
Nominal diameter DN(mm) | 15 | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 |
Rated flow coefficientKV | 21 | 38 | 72 | 112 | 170 | 273 | 384 | 512 | 940 | 1452 | 2222 | 3589 | 5128 | 7359 |
Allowable Differential Pressure(MPa) | ≤ Nominal pressure | |||||||||||||
Range of action | 0~90° | |||||||||||||
leakageQ | According to GB/T4213-92, less than rated KV0.01%. | |||||||||||||
fundamental error | ±1% | |||||||||||||
return differential (e.g. of farmland) | ±1% | |||||||||||||
deadband | ≤1%(tunable) | |||||||||||||
Adjustable range | 250:1 | 350:1 |
5. Electric flange ball valve Main parts materials
1 | Left valve body | WCB、CF8、CF8M、CF3M |
2 | Right valve body | WCB、CF8、CF8M、CF3M |
3 | valve seat | PEFE、PPL、304、316 |
4 | sphere | 2Cr13、304、316 |
5 | tappet | 2Cr13、304、316 |
6 | sealing packing | PTFE/Flexible graphite |
7 | Packing Gland | WCB、CF8、CF8M、CF3M |
8 | coupling | Q235A |
9 | actuators | Configuration actuators are different and made of different materials |
Electric flange ball valve is composed of electric actuator and ball valve. The actuator and the valve adopt direct connection mode, with delicate and beautiful appearance. Electric flange ball valve can be used with a variety of valve seat, room temperature type with PTFE seal, high temperature type can be used with para-polybenzene or metal hard seal, with low friction coefficient, small operating torque, leakage zui high up to zero leakage, etc., a variety of seat materials can be selected to adapt to a wider range. Electric flange ball valve according to the structure can be divided into two kinds of electric hard seal ball valve and electric soft seal ball valve. Electric flange ball valve with YTR series actuator can directly receive computer or industrial instrumentation output 4 ~ 20mADC or 1 ~ 5VDC control signals, according to the valve position feedback signal and the set value comparison deviation of the actuator drive motor for intelligent step adjustment (PID regulation), in order to achieve with the actuator supporting the accurate positioning of the opening of valves or other devices, and at the same time, the output of the position feedback signal of 4 ~ 20mADC, and the output of the position feedback signal. 20mADC position feedback signal.
The electric flange ball valve is particularly suitable for the medium is viscous, containing particles, fiber nature of the occasion, the electric flange ball valve is widely used in petroleum, chemical industry, metallurgy, light industry, papermaking, power station, refrigeration and other fields of work.
1、Valve body
Valve body form | Straight-through casting ball valve |
Nominal diameter | DN15~300mm |
Nominal pressure | PN1.6、2.5、4.0 MPa;ANSI 150、300LB ;JIS 10、20、30K |
Flange Standard | GB/T9113、 JB/T79、HG20594and other standards |
Connection form | Flange (FF RF RTJ), Welded (SW BW), Threaded (Taper Thread, Pipe Thread) |
Bonnet type | monolithic |
Gland type | Bolt down type |
sealing packing | V-shaped PTFE packing, impregnated PTFE packing, asbestos braided packing, flexible graphite |
Valve Material | Cast steel (WCB), stainless steel (CF8, CF8M, CF3, CF3M), chrome-molybdenum steel, WCB+F46 |
2、Valve inner parts
Spool type | O-ball spool + electronic polishing |
Flow Rate Characteristics | Approximate fast-opening characteristic |
Spool material | stainless steels(CF8、CF8M、CF3、CF3M)+nitriding |
3. Actuator
Actuator Model | YTR、3810R、DZW、HQ、PSQ |
Main technical parameters | Power supply voltage: 220V/50Hz, 380V/50Hz, input signal: 4-20mA or 1-5V-DC, output signal: 4-20mA-DC |
Protection level: IP65 (or IP67), explosion-proof symbol: ExdⅡBT4 (CT5), hand-operated functions: handle, handwheel | |
Ambient temperature: -25~+70℃, ambient humidity: ≤95%. |
4. Electric flange ball valve Main performance specification
Nominal diameter DN(mm) | 15 | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 |
Rated flow coefficientKV | 21 | 38 | 72 | 112 | 170 | 273 | 384 | 512 | 940 | 1452 | 2222 | 3589 | 5128 | 7359 |
Allowable Differential Pressure(MPa) | ≤ Nominal pressure | |||||||||||||
Range of action | 0~90° | |||||||||||||
leakageQ | According to GB/T4213-92, less than rated KV0.01%. | |||||||||||||
fundamental error | ±1% | |||||||||||||
return differential (e.g. of farmland) | ±1% | |||||||||||||
deadband | ≤1%(tunable) | |||||||||||||
Adjustable range | 250:1 | 350:1 |
5. Electric flange ball valve Main parts materials
1 | Left valve body | WCB、CF8、CF8M、CF3M |
2 | Right valve body | WCB、CF8、CF8M、CF3M |
3 | valve seat | PEFE、PPL、304、316 |
4 | sphere | 2Cr13、304、316 |
5 | tappet | 2Cr13、304、316 |
6 | sealing packing | PTFE/Flexible graphite |
7 | Packing Gland | WCB、CF8、CF8M、CF3M |
8 | coupling | Q235A |
9 | actuators | Configuration actuators are different and made of different materials |
Electric flange ball valve main appearance
Electric flange ball valve Main connection size
Nominal diameterDN(mm) | 15 | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 |
L | 130 | 140 | 150 | 165 | 180 | 200 | 220 | 250 | 280 | 320 | 360 | 400 | 630 | 750 |
H | 44.5 | 49 | 55 | 65 | 65 | 75 | 90 | 95 | 115 | 127 | 140 | 172.5 | 310 | 350 |
H1、H2、H3、A、A1、A2 | Depending on the motorized actuator assigned | |||||||||||||
PN1.6MPaFlange Connection Size | ||||||||||||||
D | 95 | 105 | 115 | 140 | 150 | 165 | 185 | 200 | 220 | 250 | 285 | 340 | 405 | 460 |
D1 | 65 | 75 | 85 | 100 | 110 | 125 | 145 | 160 | 180 | 210 | 240 | 295 | 355 | 410 |
D2 | 46 | 56 | 65 | 76 | 84 | 99 | 118 | 132 | 156 | 184 | 211 | 266 | 319 | 370 |
n-Φd | 4-14 | 4-14 | 4-14 | 4-18 | 4-18 | 4-18 | 4-18 | 8-18 | 8-18 | 8-18 | 8-22 | 12-22 | 12-26 | 12-26 |
PN2.5MPaFlange Connection Size | ||||||||||||||
D | 95 | 105 | 115 | 140 | 150 | 165 | 185 | 200 | 235 | 270 | 300 | 360 | 425 | 485 |
D1 | 65 | 75 | 85 | 100 | 110 | 125 | 145 | 160 | 190 | 220 | 250 | 310 | 370 | 430 |
D2 | 46 | 56 | 65 | 76 | 84 | 99 | 118 | 132 | 156 | 184 | 211 | 274 | 330 | 389 |
n-Φd | 4-14 | 4-14 | 4-14 | 4-18 | 4-18 | 4-18 | 8-18 | 8-18 | 8-22 | 8-26 | 8-26 | 12-26 | 12-30 | 16-30 |
PN4.0MPaFlange Connection Size | ||||||||||||||
D | 95 | 105 | 115 | 140 | 150 | 165 | 185 | 200 | 235 | 270 | 300 | 375 | 450 | 515 |
D1 | 65 | 75 | 85 | 100 | 110 | 125 | 145 | 160 | 190 | 220 | 250 | 320 | 385 | 450 |
D6 | 40 | 51 | 58 | 66 | 76 | 88 | 110 | 121 | 150 | 176 | 204 | 260 | 313 | 364 |
n-Φd | 4-14 | 4-14 | 4-14 | 4-18 | 4-18 | 4-18 | 8-18 | 8-18 | 8-22 | 8-26 | 8-26 | 12-30 | 12-22 | 16-33 |
PN6.3MPaFlange Connection Size | ||||||||||||||
D | 105 | 130 | 140 | 155 | 170 | 180 | 205 | 215 | 250 | 295 | 345 | 415 | 470 | 530 |
D1 | 75 | 90 | 100 | 110 | 125 | 135 | 160 | 170 | 200 | 240 | 280 | 345 | 400 | 460 |
D6 | 40 | 51 | 58 | 66 | 76 | 88 | 110 | 121 | 150 | 176 | 204 | 260 | 313 | 364 |
n-Φd | 4-14 | 4-18 | 4-18 | 4-22 | 4-22 | 4-22 | 8-22 | 8-22 | 8-26 | 8-30 | 8-33 | 12-36 | 12-36 | 16-36 |
Electric flange ball valve main appearance
Electric flange ball valve Main connection size
Nominal diameterDN(mm) | 15 | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 |
L | 130 | 140 | 150 | 165 | 180 | 200 | 220 | 250 | 280 | 320 | 360 | 400 | 630 | 750 |
H | 44.5 | 49 | 55 | 65 | 65 | 75 | 90 | 95 | 115 | 127 | 140 | 172.5 | 310 | 350 |
H1、H2、H3、A、A1、A2 | Depending on the motorized actuator assigned | |||||||||||||
PN1.6MPaFlange Connection Size | ||||||||||||||
D | 95 | 105 | 115 | 140 | 150 | 165 | 185 | 200 | 220 | 250 | 285 | 340 | 405 | 460 |
D1 | 65 | 75 | 85 | 100 | 110 | 125 | 145 | 160 | 180 | 210 | 240 | 295 | 355 | 410 |
D2 | 46 | 56 | 65 | 76 | 84 | 99 | 118 | 132 | 156 | 184 | 211 | 266 | 319 | 370 |
n-Φd | 4-14 | 4-14 | 4-14 | 4-18 | 4-18 | 4-18 | 4-18 | 8-18 | 8-18 | 8-18 | 8-22 | 12-22 | 12-26 | 12-26 |
PN2.5MPaFlange Connection Size | ||||||||||||||
D | 95 | 105 | 115 | 140 | 150 | 165 | 185 | 200 | 235 | 270 | 300 | 360 | 425 | 485 |
D1 | 65 | 75 | 85 | 100 | 110 | 125 | 145 | 160 | 190 | 220 | 250 | 310 | 370 | 430 |
D2 | 46 | 56 | 65 | 76 | 84 | 99 | 118 | 132 | 156 | 184 | 211 | 274 | 330 | 389 |
n-Φd | 4-14 | 4-14 | 4-14 | 4-18 | 4-18 | 4-18 | 8-18 | 8-18 | 8-22 | 8-26 | 8-26 | 12-26 | 12-30 | 16-30 |
PN4.0MPaFlange Connection Size | ||||||||||||||
D | 95 | 105 | 115 | 140 | 150 | 165 | 185 | 200 | 235 | 270 | 300 | 375 | 450 | 515 |
D1 | 65 | 75 | 85 | 100 | 110 | 125 | 145 | 160 | 190 | 220 | 250 | 320 | 385 | 450 |
D6 | 40 | 51 | 58 | 66 | 76 | 88 | 110 | 121 | 150 | 176 | 204 | 260 | 313 | 364 |
n-Φd | 4-14 | 4-14 | 4-14 | 4-18 | 4-18 | 4-18 | 8-18 | 8-18 | 8-22 | 8-26 | 8-26 | 12-30 | 12-22 | 16-33 |
PN6.3MPaFlange Connection Size | ||||||||||||||
D | 105 | 130 | 140 | 155 | 170 | 180 | 205 | 215 | 250 | 295 | 345 | 415 | 470 | 530 |
D1 | 75 | 90 | 100 | 110 | 125 | 135 | 160 | 170 | 200 | 240 | 280 | 345 | 400 | 460 |
D6 | 40 | 51 | 58 | 66 | 76 | 88 | 110 | 121 | 150 | 176 | 204 | 260 | 313 | 364 |
n-Φd | 4-14 | 4-18 | 4-18 | 4-22 | 4-22 | 4-22 | 8-22 | 8-22 | 8-26 | 8-30 | 8-33 | 12-36 | 12-36 | 16-36 |