Composite Rapid Air Vent (inlet) Valve (CARX-1.0)

summary

This product is used at the highest point of the pipe or where the gas is closed and at the pump outlet

Eliminate the gas in the pipeline to dredge the pipeline, is the pipeline to achieve normal operation. If there is no exhaust

Valve, pipeline at any time, so that the water capacity of the pipeline can not meet the design requirements.next:

If there is power failure during operation, the pipeline

Move or rupture, the exhaust, intake valve will quickly put the air into the pipe, to prevent the pipe vibration or

break.

action principle

Composite exhaust valve it must be equipped with two holes, one large and one small, large hole and diameter hole basic

Equally, for the first time, the pipeline has a large amount of gas discharged, which is discharged from the large hole.

When the gas is discharged, the large hole stops the exhaust, and the pipe is in normal operation, the pipe will naturally

Create gas check, these gases will slowly form and grow, will be concentrated in the upper part of the pipe, right

The water output of the pipeline has a certain impact, these gases by the holes, so that the pipe

Gas existence, such as power failure, pump stop, water flow in the pipe is empty will appear at any time negative pressure.

The tube needs a lot of air, the ball down, open the hole to open a lot of

Air intake ensures pipe safety.

Note: The pressure of the exhaust valve should not be lower than 0.02MPa during use, if it is lower than 0.02MPa

The exhaust valve is easy to leak, and the modified valve must be equipped with a valve for maintenance.

technical parameter

Mill parts materials

parameter list